Ant-i2 is a next-generation selective wave soldering machine with the following features:
● One drop jet fluxer
● Bottom IR preheating, optional with top preheating zone
● One solder pot with two individual wave tunnels
● PCB moves in X/Y while solder pot/fluxer moves in Z
● Single soldering nozzle handles max 350 x 215 mm
● Two nozzle could soldering max 350mm x 215mm parallel
● Windows 10 operating system
● Three-axis full servo drive with ball screw movement
● Standard equipped with wave height calibration
● Real-time soldering process monitor
| Offline Selective Soldering Machine Ant-i2 Specifications | ||
|---|---|---|
| Item | Ant-i2 | |
| General | ||
| Operating power/Max power | 7KW/13KW | |
| PCB dimension | 50x50---350x450mm (when use only one solder nozzle), 50x50---350x215mm (when use two wave nozzles parallely) | |
| Machine dimension | W1260mm x D1640mm X H1895mm | |
| Net weight | 550KG | |
| Power supply | 3PH 380V 50HZ MAX 34A Equip 40A contactor in factory | |
| Air supply | 3-5 bars | |
| Exhausting required | 200M3/h | |
| Controlling System | ||
| Industrial PC | Yes | |
| Typical Program Time | 10 Minutes | |
| Program method | Draw path in scanned picture of board | |
| Controlling system | PC | |
| PCB Robotic Platform | ||
| Axes of Motion | X, Y, Z | |
| Motion Control | Servo motors for X,Y,Z | |
| Position Accuracy | + / - 0.05mm | |
| Flux Management | ||
| Flux Nozzle type | drop jet nozzle made in Germany | |
| Flux nozzle number | 2 sets | |
| Flux Capacity | 1L | |
| Flux Tank | Constant pressure tank | |
| Preheat | ||
| IR heater | 5kw | |
| Solder Management | ||
| Standard Solder Stations | 1 | |
| Solder Pot Capacity | 35 kgs | |
| Solder Temperature Control | PID | |
| Heat-Up Time | About 50mins | |
| Solder Pot heater | 380 ℃ | |
| Solder Pot heater | 2.4kw | |
| Solder level alarm | standard | |
| Wave tunnel | two individually | |
| Wave control | servo motor, mechanical pump | |
| Solder Nozzles | ||
| Mini Wave Nozzles | Dia 4, 6,8,10,12mm | |
| Customized nozzle | Available | |
| Nozzle Material | Proprietary Alloy | |
| (N2) Inertion Management | ||
| N2 heater | Standard Equipped | |
| N2 Temp PID Control Range | 0 - 350℃ | |
| N2 Consumption per Nozzle | 1.5m3/H Total need: 3m3/H (Recommend to connect with Selmate-4 N2 generator) | |
| Required N2 Purity | >99.99% | |
